About YUXINFILM Piano Gloss Black TPU PPF

YUXINFILM piano gloss black TPU PPF is made for two jobs clear film cannot do: turning dead, sun-faded black paint back into a deep factory-black panel, and blacking out chrome trim, window surrounds, mirror caps and badges without paint work. The film is precision manufactured from USA Lubrizol thermoplastic polyurethane (TPU) top coat and Ashland pressure-sensitive adhesive, with a jet black pigment layer locked inside a 7.5mil (190 micron) cast build. Unlike printed black vinyl, the pigment sits under a clear TPU skin, so reflections stay sharp and wet instead of flat, the film does not show a white stretch line on curves, and it will not grey out or chalk under UV.

Key Specifications:

YUXINFILM Premium Paint Protection Film Series Specification:

Why Choose Gloss Black Film Instead Of Clear Film:

1. Faded paint restoration: oxidised, chalky or patchy black paint reads as one deep uniform black again, without respray, heavy polishing or a paint correction quote.
2. Chrome delete without paint: window trims, mirror caps, grille slats, door handles and badges are converted to gloss black in a few hours, and the film can be removed to return the car to stock.
3. Mirror depth, not vinyl flatness: a high-gloss clear TPU layer sits above the black pigment, so reflections stay sharp and the panel keeps the wet look of freshly polished paint.
4. Hides what black paint shows: wash swirls, holograms and light stone chipping on dark panels are visually muted under the uniform new black layer.
5. Colour-stable under UV: UV blockers are compounded into the pigment layer, so the film resists the grey-out and chalky fade that printed black vinyl shows within a season or two.

The Main Components Of Paint Protection Film:

Our TPU PPF Good Advantages:

1. Physical protection: resists high-speed stone impact, tree branch scratches, door dings and minor collisions, avoiding permanent damage to the original paint underneath and the cost of later repainting.
2. Chemical protection: the anti-UV coating blocks 99% of ultraviolet rays to prevent paint oxidation and fading, resists acid rain, bird droppings, bug splatter and tree sap, and keeps the black deep instead of going grey.
3. Self-repair function: minor scratches such as car wash swirl marks and sun patterns recover by thermal repair (sunlight, hot water or heat gun), reducing how often dark panels need polishing.
4. Hydrophobic and easy to clean: the nano coating makes water droplets slide off quickly, so dust and water spots do not stay on the surface and cleaning is easier.
5. High gloss retention: the clear TPU top coat over the black pigment keeps gloss depth, so the vehicle stays showroom-sharp for years instead of dulling out.
6. Strong stretchability: the molecular structure gives the film extremely high ductility, allowing it to fit bumpers, mirrors and hood curves tightly without edge warping, and the black pigment does not thin out or lighten at full stretch.

The Reason to Choose Strong Stretch and Self-healing TPU PPF Film:

TPU automotive protective film has become the industry's preferred choice due to its strong stretchability and thermal repair ability. Its molecular structure gives it extremely high ductility, allowing it to fit tightly to complex curved surfaces such as bumpers and hood curves to prevent edge warping, which is exactly what gloss black film needs: the black must stay even when the film is stretched around mirrors and trim. The thermal repair property allows the film surface to automatically recover from minor scratches through heating from sunlight or warm water, so the gloss stays sharp. These two advantages improve construction efficiency and long-term appearance, and reduce subsequent maintenance costs, which traditional PVC or PET materials cannot match.

Application Areas:

• Chrome delete on window surrounds, mirror caps, grille slats, door handles and badges
• Faded, oxidised or patchy black paint on bonnet, roof, boot lid, doors and fenders
• Front bumper, hood and fender protection against stone chips and road debris
• Full-body gloss black wrap for luxury, sports and new energy vehicles
• Roof and trunk lid two-tone gloss black upgrade, and bird dropping or gum protection
• Interior piano black trim, B-pillars, wheel arch lips and headlight accents

Installation Guide:

1. Surface preparation: Wash the vehicle thoroughly and wipe the application area with isopropyl alcohol to remove wax, oil and dust. On faded paint, clay the panel first so the film bonds evenly.
2. Wet application: Spray a slip solution (water + a few drops of baby shampoo) onto the film adhesive side and the paint surface.
3. Positioning: Place the film onto the panel and slide it into the correct position while the slip solution is still wet.
4. Squeegee: Use a felt-edged squeegee to push out the slip solution from the center to the edges, removing all air bubbles and wrinkles. Check dark panels under a bright side light before post-heating.
5. Edge wrapping: Heat the edges with a heat gun at 60-80 degrees Celsius and wrap the film around the panel edges for a seamless, tucked finish.
6. Heat setting: After installation, park the vehicle in a warm area for 24 hours. Do not wash the car for 7 days to allow the adhesive to fully cure.

Maintenance & Care Tips:

• Hand wash with mild automotive shampoo; avoid high-pressure washing directly at film edges within the first week.
• Do not use abrasive polishes or waxes containing solvents on the film surface, they leave a haze that is very visible on dark panels.
• Remove bird droppings, water spots and tree sap early, they show faster on black film than on clear film.
• Minor scratches can be removed by pouring hot water (60-70 degrees Celsius) over the area or using a heat gun at low temperature.
• Park in shaded areas when possible to maximize the service life of the film.

Yuxin Film TPU Paint Protection Film PPF Factory Tour

YUXINFILM Factory Free Dust Paint Protection Film Production Line

• Super Factory: Integrated Supply Chain supplier: Functional Masterbatch - Base Film - Coating - Slitting - Finished Product

• Whole Industrial Chain Manufacturer: Advanced equipment, top-notch full import TPU film equipment, independent upgrading and improving.

• Professional Teams: Thermoplastic elastomer polymer experts, mechanical equipment experts, coating engineers, production technology team.

Professional QC Team Checking PPF Before Shipping

• Quality Control (QC): Our dedicated QC team conducts thorough inspections before shipment.

  This includes verifying that the product quality matches the sample provided and ensuring that the length of the film meets the specified requirements.

• Fast delivery: A big warehouse with all kinds of TPU paint protection film, car window film, architecture decorative film, tpu windshield and tpu colored ppf film in stock, to get goods to your hands immediately.

Customized Your Brand: OEM/ODM Service

We accept OEM/ODM customization: your own brand logo, custom packaging, special roll sizes and widths (from 5cm trim rolls for chrome delete up to the full 1.52m), custom colors (gloss black, matte black, satin black, gloss clear, color PPF), precut kits from your plotter file or 3D data, and private label programs. Our in-house design team supports artwork preparation and sample confirmation before mass production.

ROHS/ISO9000/MSDS/SGS Certification

Packaging & Shipping:

• Standard export packaging: 163 x 19 x 21cm per box, film core-protected with shock-proof packing.
• Delivery time: 2-3 working days for stock items; 15-20 days for OEM customized orders.
• Supply ability: 1,000,000 rolls per month to support large wholesale and distribution orders.

FAQs

1. Does gloss black PPF look like factory black paint or like a vinyl wrap?

It reads as paint, not vinyl. The black pigment sits under a clear TPU top layer, so reflections stay sharp and deep instead of the flat, slightly grainy look of calendered black vinyl.

2. Can the film be used for chrome delete on window trims and grilles, and will the edges lift?

Yes, that is one of its main uses. Degrease the chrome first, use a primer pen on tight inner corners, post-heat edges at 70-80 degrees Celsius, and the Ashland adhesive holds the wrap without lifting in car washes.

3. Will the black film fade, chalk or turn grey in strong sun?

No. UV blockers are compounded into the pigment layer and the film carries a 10-year warranty, so it resists the grey-out that printed black vinyl shows after one or two summers.

4. Can the film be removed later without damaging the original black paint?

Yes. The Ashland adhesive is designed for clean removal. Warm the panel to about 40-50 degrees Celsius, peel at a low angle, and no clear coat is pulled as long as the OEM paint is healthy.

5. Is gloss black harder to install than clear film because dust and bubbles show more?

It demands a cleaner bay, not a different technique. Work with wet slip solution, keep the squeegee felt clean, and check the panel under a bright side light before post-heating, since dark film hides less.

6. Can you supply narrow rolls or precut kits for chrome delete and specific car models?

Yes. We slit custom widths from 5cm trim rolls up to the full 1.52m width, and we can produce precut kits from your plotter file or 3D data, with your own brand label on the core.